Descor PVC System
Descor PVC System Features
The Descor PVC System can be used to install fabric on walls and other surfaces to slash installation times and cut costs.
The system allows fabric to be installed anywhere there’s a wood or interior light steel structure.
The system is applied across seams in the base to eliminate visible seams while creating an appealing surface. The system can be installed on large ceilings and walls using lightweight tools.
Absence of sewing and use of simple check items for the design process significantly reduce preparation time from receipt of a design to site installation.
PVC strips around the outside of the installation can be either white or black.
Can be installed on curved surfaces.
Compatible sheets
The system can accommodate fabric graphics with a width of up to 5,000 mm.
Wall Sheet D, a large-format projection screen from ENDLOS, is compatible with the system (available in white or black).
| Compatible sheets | Fabric width | Output |
|---|---|---|
| Wall Sheet D White | W5100 and W3000 | UV |
| Wall Sheet D Black | W5100 | UV |
The base material for all variants is 100% polyester. All variants have obtained a flame-resistant product number.
Installation Procedure
Installation Procedure1
Step 1
Descor PVC frames are screwed to the wood or light steel structure.
Step 2
Step 2
The fabric is aligned with the tension positions.
Step 3
Step 3
The sheet is tensioned while pushing it into the hardware using a special tool.
Step 4
Step 4
Excess sheet is cut away to complete the installation.
Some surface scratching may occur depending on the graphic.
No sewing of the sheet is required, allowing fast turnaround from receipt of a design to installation.
The system is compatible with materials that are suited to use as seamless screens with a height of up to 4,900 mm.
Easily create spaces with designs that seem immediate and familiar on large ceilings and walls.
Curved areas can be utilized freely.